A jet ski dock is easy for a motorboat to drive on the boat dock or breakwater to allow for easy access and removal of the watercraft. The material of the dock is HDPE, the jet ski dock have the nonskid walking surface with an easy slide rail system to allow the motorboat drive on and slide into the water, it also make sure it could to be successfully launched by one person.
There is the traditional dry dock is a vessel pulled alongside and tied into position, it used to drive the vessel to a dry storage for a short or long term storage. The drive on dock is designed to be set in the water for a long time.
Many jet ski-type personal watercraft are damaged from being beaten against the side of a common dock by the wind and waves. By incorporating a purpose-built jet ski dock into an existing boat or swimming dock, the personal watercraft is no longer subjected to the tossing and rolling nature of being tied alongside the dock. When finished riding and enjoying the watercraft, the rider simply drives the watercraft onto the jet ski dock and stops when the watercraft contacts the built-in stop block. The jet ski dock pivots up and out of the water as the jet ski makes its way onto the dock and locks into a raised position. The rider is able to climb off of the watercraft and exit the dock.
When removing the jet ski from the dock, the rider releases the locking mechanism on the dock and climbs aboard the jet ski. The jet ski dock pivots down towards the water and the watercraft rolls slowly off of the dock and into the water. The rider is able to start the vessel and ride away. The jet ski dock remains in the lowered position until the rider has finished his ride and drives back onto the dock, where the process is once again repeated by lifting the watercraft up and out of the water and into the storage position.